<%@LANGUAGE="JAVASCRIPT" CODEPAGE="1252"%> 3 Phase Electric Prepayment Metering
   
 
 
 
 
   

Prepayment Metering
Three Phase

 
 
 
 
     
 
   
                   
 
 
Electricity Prepayment  
   
                     
     
Meter Card Vending Unit
         

The JG3101PM is a Card Operated 3 Phase Electricity Prepayment Meter System
It comprises of 3 Component Parts
1 - Electricity Meter - with a pulsed output
2 - Card Reader
3 - Electrical Contactor - (Not supplied- Normally Open)
Card Reader
The Card Reader is programmed to give the card a value and the cards are used twice and then disposed of.
example if a cost of electric is say 10p per kWh and each side of the card is set/programmed to give 50 units
50 x 2 = 100 @ 10p = £10
Emergency Credit
Each HE203 Card Reader can be programmed to give an Emergency Credit Facility - at zero credit
A low credit buzzer warning is an additional programmable option

Cards
The Cards are used twice and disposed of : - Landlords/Operators are registered with our Card Bank for security and replacement cards are sold in packs of 200 = 12p each 2000 = 8p each
Loads etc
The maximum load is 100amps per phase 230/415 volts
The unit will increment both kWh's ( Active load) kVarh ( Reactive Load)
Enclosure
The Prepayment Package is fitted into a heavy duty enclosure manufactured to IP67 standard with a unique Prepayment Card Flap

Cost Of JG3101PM - Package
£289.00 + vat and carriage

 
Card Vending Unit
 
     
 
 
 
 
                   
                         
 
           
   
Wiring Schematic HE 203 Card Reader - Installation Instructions Card Flap Picture