Q1 - I don't understand all the technical jargon -- why are the Tomi Range  dry dials- multi jet such good quality
A1 -- Tomi's are dry dials -- lower quality product are known as wet dials -- the wet dails allows the water over the 
reading face which soon discolours and destroys the reading face -- Tomi's are a quality product at budget prices 

Q2 - Do you have  hot water meters
A2 - Yes TOMI's have both hot & cold in their range of water meters 

Q3 - Why do I need  a hot water meter, wont cold always do !!!
A3 - Cold Meters are designed for  temperatures up to 40C --- Hot Water Meters have a different interior 
 design and are suitable for temperatures for up to 90c 

Q4 - I am using   the meter in a Building Management System what about a pulsed out put  version
A4 - Both hot and cot versions have  a pulsed output available 

Q5 - Are TOMi's's  expensive 
A5 - No all our products are manufactured to a high quality and are low cost 

Q6 - What options  are available for Energy billing within Heating & Cooling Systems
A6 - Please refer to www.hcm4.com

Q7 - My water pipes are in awkward places such as beneath floors and in ceilings they are going to be very
difficult to read, is there anything I can do ?
A7 - Yes RCU's are made to solve this problem (remote counter units) they are designed to assist easy reading
Remote Counter Units  

Q8 - I would like an instantaneous flow reading (ie the flow through the meter at the time of viewing) is it
possible ?
A8 - Meters give normally a total only (ie the total flow through the meter) however by attaching a UM420
and connecting the pulsed output from the meter to the UM420 this can be achieved please view details
Utility Meter 4 -20 

Q9 - Can you provide a Automatic Meter Reading system - so i do not have too read the meters manually 
A9 - Yes we manufacture a number of AMR options please contact to discuss your project  requirements.

Q10 - My water meter is to be located outside what protection is required 
A10 - TOMi's have frost protection in their design, but in freezing temperatures (winter conditions) water will freeze 
and could damage the meter. We strongly recommend in external locations that Thermal Jackets are used

Q11 - In hot water applications do the meters require insulation
A11 - Yes where hot water installations a temperature differential such as heating and ambient air temperature
its recommend that Thermal Jackets  are used 

Q12 - What is a WRAS Approved Product and why ? do i need it ? 
A12 - Water Regulations Advisory Scheme all Water Meters connected to the public/mains water supply in the UK 
         must be a Wras approved product. It is a criminal offence to fit a non approved product 
        WRAS APPROVAL    All TOMi meters are WRAS approved